DJI Mavic Mini & Mini 2 Gimbal Vibration Repair - Shaky Footage Fix
Shaky or jello footage on a Mini 2 usually means worn, torn or missing gimbal dampers, or a gimbal knocked out of line. We replace the shock absorbers, check the gimbal and props for the source of the vibration and calibrate everything. It costs £119.99, takes typically 3-7 days and is covered by our 12-month warranty. Post it in or drop it at our London workshop by appointment.
Typisk reparationstid: 3-7 Days
All DJI Mavic Mini & Mini 2 repairs
Er du i tvivl om, hvad du har brug for, eller vil du have noget, der ikke står på listen? Få et gratis tilbud →
Aflever den på vores værksted i London (ofte klar samme dag), eller send den ind fra hvor som helst i verden.
Signs your Mini 2 needs this
- Footage wobbles, shimmers or shows a "jello" effect
- The gimbal shakes or buzzes in a hover
- The camera horizon twitches or drifts during flight
- A rubber damper is torn, flattened or missing
Hvad forårsager det
- Gimbal shock absorbers that have hardened, split or fallen out over time
- A crash that tears a damper or bends the gimbal mount
- Damaged or unbalanced propellers adding vibration to the airframe
Hvordan vi fikser det
- Check the props, motors and gimbal mount to find the source of the vibration
- Fit new gimbal shock absorbers and reseat the gimbal plate
- Correct any misalignment in the gimbal so it hangs and levels freely
- Calibrate the IMU, compass and gimbal, run a full hover and function test on the Mini 2, then send it back tracked with photos of the work.
Med et blik
- Pris
- £119.99
- Typisk reparationstid
- 3-7 Days
- Garanti
- 12 months
- Hvordan
- Mail-in over hele verden eller aflevering i London efter aftale
- Ekstra reparationer
- 10% off each extra fix in the same order
Other DJI Mavic Mini & Mini 2 repairs & upgrades
Same fix, other drones
Ofte stillede spørgsmål
Why is my Mini 2 footage shaky?
The usual cause is the gimbal's rubber shock absorbers. Once one tears or hardens, motor vibration reaches the camera. Bent props and a knocked gimbal are the other common causes, and we check all three.
Will a gimbal calibration fix the vibration?
Not if the dampers are damaged. Calibration only corrects the gimbal's level; it cannot stop vibration getting through a torn or missing shock absorber.
Do you replace all the dampers or just the broken one?
We fit a full set so the gimbal plate is evenly supported. A single new damper next to old, hardened ones can leave the gimbal sitting unevenly.
Kan jeg tilføje andre reparationer til samme ordre?
Yes. Gimbal vibration repair is already ticked for you above, and you can tick anything else your Mini 2 needs in the same order. The most expensive job is full price and every extra repair or upgrade is 10% off.
How do I get my Mini 2 to you?
Send det fra hvor som helst: UK-ordrer kan omfatte en forudbetalt sporet etiket, og internationale kunder får vores værkstedsadresse og pakningsinstruktioner via e-mail. Vi sender det sporet tilbage uden ekstra omkostninger. I Storbritannien kan du også aflevere det på vores London-værksted efter aftale.
Is the gimbal vibration repair covered by a warranty?
Yes. Every repair and upgrade we carry out on a drone comes with a 12-month warranty from our London workshop, and we send photos or video of the finished work before it ships back to you.
