DJI Mini 3 & Mini 3 Pro Gimbal Vibration Repair - Shaky Footage Fix
Shaky or jello footage on a Mini 3 usually means worn, torn or missing gimbal dampers, or a gimbal knocked out of line. We replace the shock absorbers, check the gimbal and props for the source of the vibration and calibrate everything. It costs £129.99, takes typically 3-7 days and is covered by our 12-month warranty. Post it in or drop it at our London workshop by appointment.
Typisk reparasjonstid: 3-7 Days
All DJI Mini 3 & Mini 3 Pro repairs
Usikker på hva du trenger, eller vil du ha noe som ikke står på listen? Få et gratis pristilbud →
Lever den inn på verkstedet vårt i London (ofte ferdig samme dag), eller send den inn fra hvor som helst i verden.
Signs your Mini 3 needs this
- Footage wobbles, shimmers or shows a "jello" effect
- The gimbal shakes or buzzes in a hover
- The camera horizon twitches or drifts during flight
- A rubber damper is torn, flattened or missing
Hva forårsaker det
- Gimbal shock absorbers that have hardened, split or fallen out over time
- A crash that tears a damper or bends the gimbal mount
- Damaged or unbalanced propellers adding vibration to the airframe
Hvordan vi fikser det
- Check the props, motors and gimbal mount to find the source of the vibration
- Fit new gimbal shock absorbers and reseat the gimbal plate
- Correct any misalignment in the gimbal so it hangs and levels freely
- Calibrate the IMU, compass and gimbal, run a full hover and function test on the Mini 3, then send it back tracked with photos of the work.
Med et blikk
- Pris
- £129.99
- Typisk reparasjonstid
- 3-7 Days
- Garanti
- 12 months
- Hvordan
- Send inn over hele verden eller avlevering i London etter avtale
- Ekstra reparasjoner
- 10% off each extra fix in the same order
Other DJI Mini 3 & Mini 3 Pro repairs & upgrades
Same fix, other drones
Ofte stilte spørsmål
Why is my Mini 3 footage shaky?
The usual cause is the gimbal's rubber shock absorbers. Once one tears or hardens, motor vibration reaches the camera. Bent props and a knocked gimbal are the other common causes, and we check all three.
Will a gimbal calibration fix the vibration?
Not if the dampers are damaged. Calibration only corrects the gimbal's level; it cannot stop vibration getting through a torn or missing shock absorber.
Do you replace all the dampers or just the broken one?
We fit a full set so the gimbal plate is evenly supported. A single new damper next to old, hardened ones can leave the gimbal sitting unevenly.
Can I add other repairs to the same order?
Yes. Gimbal vibration repair is already ticked for you above, and you can tick anything else your Mini 3 needs in the same order. The most expensive job is full price and every extra repair or upgrade is 10% off.
How do I get my Mini 3 to you?
Send den inn fra hvor som helst: UK-bestillinger kan inkludere en forhåndsbetalt sporet etikett, og internasjonale kunder får verkstedadressen vår og pakkeinstruksjoner på e-post. Vi sender den sporet tilbake uten ekstra kostnad. I Storbritannia kan du også levere den på vårt London-verksted etter avtale.
Is the gimbal vibration repair covered by a warranty?
Yes. Every repair and upgrade we carry out on a drone comes with a 12-month warranty from our London workshop, and we send photos or video of the finished work before it ships back to you.
