DJI Mini 4 Pro Gimbal Vibration Repair - Shaky Footage Fix
Shaky or jello footage on a Mini 4 Pro usually means worn, torn or missing gimbal dampers, or a gimbal knocked out of line. We replace the shock absorbers, check the gimbal and props for the source of the vibration and calibrate everything. It costs £119.99, takes typically 3-7 days and is covered by our 12-month warranty. Post it in or drop it at our London workshop by appointment.
Tiempo típico de reparación: 3-7 Days
¿No sabes qué necesitas o quieres algo que no aparece en la lista? Consigue un presupuesto gratis →
Entrégalo en nuestro taller de Londres (posible el mismo día) o envíalo por correo desde cualquier parte del mundo.
Signs your Mini 4 Pro needs this
- Footage wobbles, shimmers or shows a "jello" effect
- The gimbal shakes or buzzes in a hover
- The camera horizon twitches or drifts during flight
- A rubber damper is torn, flattened or missing
¿Qué lo causa?
- Gimbal shock absorbers that have hardened, split or fallen out over time
- A crash that tears a damper or bends the gimbal mount
- Damaged or unbalanced propellers adding vibration to the airframe
como lo solucionamos
- Check the props, motors and gimbal mount to find the source of the vibration
- Fit new gimbal shock absorbers and reseat the gimbal plate
- Correct any misalignment in the gimbal so it hangs and levels freely
- Calibrate the IMU, compass and gimbal, run a full hover and function test on the Mini 4 Pro, then send it back tracked with photos of the work.
De un vistazo
- Precio
- £119.99
- Tiempo típico de reparación
- 3-7 Days
- Garantía
- 12 months
- Cómo
- Envío por correo a todo el mundo o entrega en Londres con cita previa
- Reparaciones adicionales
- 10% off each extra fix in the same order
Other DJI Mini 4 Pro repairs & upgrades
Same fix, other drones
Preguntas frecuentes
Why is my Mini 4 Pro footage shaky?
The usual cause is the gimbal's rubber shock absorbers. Once one tears or hardens, motor vibration reaches the camera. Bent props and a knocked gimbal are the other common causes, and we check all three.
Will a gimbal calibration fix the vibration?
Not if the dampers are damaged. Calibration only corrects the gimbal's level; it cannot stop vibration getting through a torn or missing shock absorber.
Do you replace all the dampers or just the broken one?
We fit a full set so the gimbal plate is evenly supported. A single new damper next to old, hardened ones can leave the gimbal sitting unevenly.
Can I add other repairs to the same order?
Yes. Gimbal vibration repair is already ticked for you above, and you can tick anything else your Mini 4 Pro needs in the same order. The most expensive job is full price and every extra repair or upgrade is 10% off.
How do I get my Mini 4 Pro to you?
Envíelo por correo desde cualquier lugar: los pedidos en el Reino Unido pueden incluir una etiqueta de seguimiento prepaga y los clientes internacionales reciben la dirección de nuestro taller y las instrucciones de embalaje por correo electrónico. Lo devolvemos con seguimiento sin cargo adicional. En el Reino Unido también puedes dejarlo en nuestro taller de Londres con cita previa.
Is the gimbal vibration repair covered by a warranty?
Yes. Every repair and upgrade we carry out on a drone comes with a 12-month warranty from our London workshop, and we send photos or video of the finished work before it ships back to you.
