DJI Mini 3 & Mini 3 Pro Gimbal Stuck Repair (Error 40002)
DJI error 40002 means the gimbal motor is overloaded, usually because the Mini 3 gimbal is stuck, bent or obstructed. We find what is jamming it, repair or replace the damaged gimbal parts and recalibrate it. It costs £129.99, takes typically 3-7 days and is covered by our 12-month warranty. Post it in or drop it at our London workshop by appointment.
Tiempo típico de reparación: 3-7 Days
All DJI Mini 3 & Mini 3 Pro repairs
¿No sabes qué necesitas o quieres algo que no aparece en la lista? Consigue un presupuesto gratis →
Entrégalo en nuestro taller de Londres (posible el mismo día) o envíalo por correo desde cualquier parte del mundo.
Signs your Mini 3 needs this
- The DJI app shows "Gimbal motor overload" or error code 40002
- The Mini 3 gimbal does not move or level itself on start-up
- The camera sits tilted, twitches or buzzes after power on
- The horizon stays crooked even after a gimbal calibration
¿Qué lo causa?
- Flying or powering on with the gimbal guard still fitted
- A knock that bends the gimbal arm or shifts a motor
- Grit, sand or hair caught in a gimbal motor
- A damaged gimbal ribbon cable after a crash
como lo solucionamos
- Check the gimbal motors, arms and ribbon cable for what is causing the overload
- Clear any obstruction and straighten or replace the bent or damaged gimbal parts
- Refit the gimbal so every axis moves freely through its full range
- Calibrate the IMU, compass and gimbal, run a full hover and function test on the Mini 3, then send it back tracked with photos of the work.
De un vistazo
- Precio
- £129.99
- Tiempo típico de reparación
- 3-7 Days
- Garantía
- 12 months
- Cómo
- Envío por correo a todo el mundo o entrega en Londres con cita previa
- Reparaciones adicionales
- 10% off each extra fix in the same order
Other DJI Mini 3 & Mini 3 Pro repairs & upgrades
Preguntas frecuentes
What does error 40002 mean on a Mini 3?
It is DJI's gimbal motor overload warning. The motor is pushing against something it cannot move, usually a stuck, bent or obstructed gimbal, and it is not fixed by a software update.
Can error 40002 fix itself?
Sometimes it clears once a gimbal guard or debris is removed and the drone is restarted on level ground. If it comes back, the gimbal is physically damaged and running it overloaded can burn out a motor, so stop powering it on and send it in.
Will I need a whole new gimbal and camera?
Not always. We repair the stuck part first. If the camera or gimbal is beyond repair we quote for a gimbal and camera replacement before doing any extra work.
Can I add other repairs to the same order?
Yes. Gimbal stuck (error 40002) is already ticked for you above, and you can tick anything else your Mini 3 needs in the same order. The most expensive job is full price and every extra repair or upgrade is 10% off.
How do I get my Mini 3 to you?
Envíelo por correo desde cualquier lugar: los pedidos en el Reino Unido pueden incluir una etiqueta de seguimiento prepaga y los clientes internacionales reciben la dirección de nuestro taller y las instrucciones de embalaje por correo electrónico. Lo devolvemos con seguimiento sin cargo adicional. En el Reino Unido también puedes dejarlo en nuestro taller de Londres con cita previa.
Is the gimbal stuck (error 40002) covered by a warranty?
Yes. Every repair and upgrade we carry out on a drone comes with a 12-month warranty from our London workshop, and we send photos or video of the finished work before it ships back to you.
