DJI Avata 2 Gimbal Vibration Repair - Shaky Footage Fix
Shaky or jello footage on a Avata 2 usually means worn, torn or missing gimbal dampers, or a gimbal knocked out of line. We replace the shock absorbers, check the gimbal and props for the source of the vibration and calibrate everything. It costs £59.99, takes typically 3-7 days and is covered by our 12-month warranty. Post it in or drop it at our London workshop by appointment.
Typische reparatietijd: 3-7 Days
Weet je niet wat je nodig hebt, of wil je iets dat er niet bij staat? Vraag een gratis offerte aan →
Breng het langs bij onze werkplaats in Londen (vaak dezelfde dag klaar) of stuur het op vanaf overal ter wereld.
Signs your Avata 2 needs this
- Footage wobbles, shimmers or shows a "jello" effect
- The gimbal shakes or buzzes in a hover
- The camera horizon twitches or drifts during flight
- A rubber damper is torn, flattened or missing
Wat veroorzaakt het
- Gimbal shock absorbers that have hardened, split or fallen out over time
- A crash that tears a damper or bends the gimbal mount
- Damaged or unbalanced propellers adding vibration to the airframe
Hoe wij het oplossen
- Check the props, motors and gimbal mount to find the source of the vibration
- Fit new gimbal shock absorbers and reseat the gimbal plate
- Correct any misalignment in the gimbal so it hangs and levels freely
- Calibrate the IMU, compass and gimbal, run a full hover and function test on the Avata 2, then send it back tracked with photos of the work.
In één oogopslag
- Prijs
- £59.99
- Typische reparatietijd
- 3-7 Days
- Garantie
- 12 months
- Hoe
- Wereldwijd opsturen of afleveren in Londen op afspraak
- Extra reparaties
- 10% off each extra fix in the same order
Other DJI Avata 2 repairs & upgrades
Same fix, other drones
Veelgestelde vragen
Why is my Avata 2 footage shaky?
The usual cause is the gimbal's rubber shock absorbers. Once one tears or hardens, motor vibration reaches the camera. Bent props and a knocked gimbal are the other common causes, and we check all three.
Will a gimbal calibration fix the vibration?
Not if the dampers are damaged. Calibration only corrects the gimbal's level; it cannot stop vibration getting through a torn or missing shock absorber.
Do you replace all the dampers or just the broken one?
We fit a full set so the gimbal plate is evenly supported. A single new damper next to old, hardened ones can leave the gimbal sitting unevenly.
Can I add other repairs to the same order?
Yes. Gimbal vibration repair is already ticked for you above, and you can tick anything else your Avata 2 needs in the same order. The most expensive job is full price and every extra repair or upgrade is 10% off.
How do I get my Avata 2 to you?
Stuur het overal op: Britse bestellingen kunnen een vooraf betaald trackinglabel bevatten, en internationale klanten ontvangen ons werkplaatsadres en verpakkingsinstructies per e-mail. Wij sturen het zonder extra kosten aangetekend terug. In Groot-Brittannië kunt u het op afspraak ook afgeven in onze werkplaats in Londen.
Is the gimbal vibration repair covered by a warranty?
Yes. Every repair and upgrade we carry out on a drone comes with a 12-month warranty from our London workshop, and we send photos or video of the finished work before it ships back to you.
