DJI Mini 3 & Mini 3 Pro Gimbal Stuck Repair (Error 40002)
DJI error 40002 means the gimbal motor is overloaded, usually because the Mini 3 gimbal is stuck, bent or obstructed. We find what is jamming it, repair or replace the damaged gimbal parts and recalibrate it. It costs £129.99, takes typically 3-7 days and is covered by our 12-month warranty. Post it in or drop it at our London workshop by appointment.
Typische Reparaturzeit: 3-7 Days
All DJI Mini 3 & Mini 3 Pro repairs
Nicht sicher, was du brauchst, oder willst du etwas, das nicht gelistet ist? Kostenloses Angebot einholen →
Bring dein Gerät in unserer Londoner Werkstatt vorbei (oft noch am selben Tag fertig) oder schick es von überall auf der Welt ein.
Signs your Mini 3 needs this
- The DJI app shows "Gimbal motor overload" or error code 40002
- The Mini 3 gimbal does not move or level itself on start-up
- The camera sits tilted, twitches or buzzes after power on
- The horizon stays crooked even after a gimbal calibration
Was verursacht es?
- Flying or powering on with the gimbal guard still fitted
- A knock that bends the gimbal arm or shifts a motor
- Grit, sand or hair caught in a gimbal motor
- A damaged gimbal ribbon cable after a crash
Wie wir es beheben
- Check the gimbal motors, arms and ribbon cable for what is causing the overload
- Clear any obstruction and straighten or replace the bent or damaged gimbal parts
- Refit the gimbal so every axis moves freely through its full range
- Calibrate the IMU, compass and gimbal, run a full hover and function test on the Mini 3, then send it back tracked with photos of the work.
Auf einen Blick
- Preis
- £129.99
- Typische Reparaturzeit
- 3-7 Days
- Garantie
- 12 months
- Wie
- Weltweiter Postversand oder Abgabe in London nach Vereinbarung
- Zusätzliche Reparaturen
- 10% off each extra fix in the same order
Other DJI Mini 3 & Mini 3 Pro repairs & upgrades
Häufig gestellte Fragen
What does error 40002 mean on a Mini 3?
It is DJI's gimbal motor overload warning. The motor is pushing against something it cannot move, usually a stuck, bent or obstructed gimbal, and it is not fixed by a software update.
Can error 40002 fix itself?
Sometimes it clears once a gimbal guard or debris is removed and the drone is restarted on level ground. If it comes back, the gimbal is physically damaged and running it overloaded can burn out a motor, so stop powering it on and send it in.
Will I need a whole new gimbal and camera?
Not always. We repair the stuck part first. If the camera or gimbal is beyond repair we quote for a gimbal and camera replacement before doing any extra work.
Kann ich dem gleichen Auftrag weitere Reparaturen hinzufügen?
Yes. Gimbal stuck (error 40002) is already ticked for you above, and you can tick anything else your Mini 3 needs in the same order. The most expensive job is full price and every extra repair or upgrade is 10% off.
How do I get my Mini 3 to you?
Senden Sie es von überall aus ein: Bestellungen im Vereinigten Königreich können mit einem vorausbezahlten Sendungsverfolgungsetikett versehen sein, und internationale Kunden erhalten unsere Werkstattadresse und Verpackungsanweisungen per E-Mail. Wir senden es ohne zusätzliche Kosten mit Sendungsverfolgung zurück. In Großbritannien können Sie es nach Vereinbarung auch in unserer Londoner Werkstatt abgeben.
Is the gimbal stuck (error 40002) covered by a warranty?
Yes. Every repair and upgrade we carry out on a drone comes with a 12-month warranty from our London workshop, and we send photos or video of the finished work before it ships back to you.
